3s-10s 150A BMS for 36V 37V Li-ion/Lithium/ Li-Polymer 30V 32V LiFePO4 Battery Pack with Smbus,I2c Bluetooth, RS232, RS485 (PCM-L10S200-C49)
Product Description
Product name:Protection Circuit Module
Model No:PCM-L10S200-C49
For 3~10S Lithium-ion/Lithium Polymer/LiFePO4 Battery Packs
Product Feature:
1. Suitable for 3-10 section Lithium-ion/Lithium Polymer/LiFePO4 Battery Packs;
2. Connect with special upper computer software, which can display the total voltage, capacity, current, temperature, cycle times and other parameters;
3. Cooperate with communication adapter module supports SMBus,I2C, RS232 and RS485 communication protocol;
4. Connect to the special APP via bluetooth;
5. The measurement IC adopts TI BQ series, which can read the parameters such as voltage, capacity, current, temperature, cycle number, etc.
6. With over charge, over discharge, short circuit, over current, temperature protection;
7. The maximum continuous working current is 150A, with the same interface for charging and discharging;
8. Through the model PCM-LCD001-415 display screen, the required information can be read;
| Items | Specifications | ||
| Lithium-ion/Lithium Polymer | LiFePO4 | ||
| Charge | Charging voltage(CC/CV)-10S | CC/CV:42V | CC/CV:36V |
| Maximal continuous charging current | 150A | ||
| Discharge | Maximal continuous discharging current | 150A | |
| Low current consumption | Current consumption on operation | <600μA | |
| Current consumption at power down | ≤350μA | ||
| Cell-balance | Cell-balance detection voltage | 4.20 ± 0.03 V | 3.60 ± 0.03 V |
| Cell-balance release voltage | 4.20 ± 0.03 V | 3.60 ± 0.03 V | |
| Cell-balance current | 68 ±3mA | 58 ±3mA | |
| Over-charge | Overcharge detection voltage | 4.25±0.025V | 3.900 ± 0.025V |
| Overcharge release voltage | 4.15±0.05V | 3.800 ± 0.050V | |
| Overcharge delay time | 0.5~2S | ||
| Over-discharge | Overdischarge detection voltage | 2.50±0.062V | 2.00±0.080V |
| Overdischarge release voltage | 3.0±0.075V | 2.30±0.100V | |
| Overdischarge delay time | 10~400mS | ||
| Discharge overcurrent | Discharge overcurrent detection voltage | 0.2±0.015V | 0.10±0.015V |
| Discharge overcurrent delay time | 5~60ms | ||
| Discharge overcurrent protection | 600±150A(adjustable) | ||
| Release condition | Cut-off-load | ||
| Short-circuiting protection | Load short-circuiting detection voltage | / | / |
| Detection condition | Exterior short circuit | ||
| Load short-circuiting detection delay time | 200~800μs | ||
| Release condition | Cut-off-load | ||
| Internal resistance | Static Drain-Source On-Resistance | <40mΩ(B- to P-) | |
| Temperature | Wide range of operation temperature | 40 ~ + 85ºC | |
| Storage Temperature Range | -40 ~ +125ºC | ||
| Dimension | L230*W140*T35mm | ||