3s 4s 100A BMS for 14.4V 14.8V Li-ion/Lithium/Li-Polymer 12V 12.8V LiFePO4 Battery Pack with Smbus, I2c, RS232, RS485 and NTC (PCM-L04S100-F49)

Product Description

Technical parameter

Product name:Protection Circuit Module
Model No:PCM-L04S100-F49
For 3~4S Lithium-ion/Lithium Polymer/LiFePO4 Battery Packs
Product Feature:
1. Suitable for 3~4 section Lithium-ion/Lithium Polymer/LiFePO4 Battery Packs;
2. Maximum continuous working current 100A, same interface for charging/discharging;
3. Overcharge, overdischarge, short circuit, overcurrent, temperature protection, etc.;
4. Ti BQ34Z100 is adopted;
5. Through the PCM-LCD001-415 display screen, the required information can be read;
6. Connected to the special upper computer software, can display the total voltage, each battery voltage,
capacity,current, temperature, cycle times and other parameters;

Items		Specifications
		Lithium-ion/Lithium Polymer	LiFePO4
Communication Interface		SMBus or I2C
Capacity	Designing battery capacity(4S2P)	100Ah(can adjust)
	Max capacity(Battery pack)	290Ah
	Min capacity(Battery pack)	100mAh
	External capacity Indication	LCD,LED
	Gas gauge algorithm	IT (High accuracy)
Charge	Charging voltage(CC/CV)-4S	CC/CV:16.8V(4.2V/Cell)	CC/CV:14.4V(3.6V/Cell)
	Charging voltage(CC/CV)-3S	CC/CV:12.6V(4.2V/Cell)	CC/CV:10.8V(3.6V/Cell)
	Maximal continuous charging current	100A(Max)
Discharge	Maximal continuous discharging current	100A(Max)
Low current consumption	Current consumption on operation	<50µA
	Current consumption at power down	/
Cell-balance	Cell-balance detection voltage	4.20 ± 0.03 V	3.60 ± 0.03 V
	Cell-balance release voltage	4.20 ± 0.03 V	3.60 ± 0.03 V
	Cell-balance current	158 ±10mA	124 ±10mA
Over-charge	Overcharge detection voltage	4.250 ± 0.025 V	3.900 ± 0.025 V
	Overcharge release voltage	4.150 ± 0.050 V	3.600 ± 0.050 V
	Overcharge delay time	0.5~2.0S
Over-discharge	Overdischarge detection voltage	2.50 ± 0.080 V	2.00 ± 0.080 V
	Overdischarge release voltage	3.00 ± 0.100 V	2.30 ± 0.100 V
	Overdischarge delay time	10~400mS
Discharge overcurrent	Discharge overcurrent detection voltage	0.20 ± 0.025 V	0.10 ± 0.025 V
	Discharge overcurrent delay time	5~60ms
	Discharge overcurrent protection	450±50A(can adjust)
	Release condition	Cut-off-load
Short-circuiting protection	Load short-circuiting detection voltage
	Detection condition	Exterior short circuit
	Load short-circuiting detection delay time	200 ~ 800µs
	Release condition	Cut-off-load
Internal resistance	Static Drain-Source On-Resistance	<50mΩ(B- to P-)
Temperature	Wide range of operation temperature	− 40 ~ + 85 °C
	Storage Temperature Range	-40~+125ºC
Dimension		L200W115T11mm
B+:Battery+
B-:Battery-
SDA:Serial Data interface
SCL:Serial Clock interface
HDQ:Open drain HDQ Serial communication line (slave)
P+:Charge+/discharge+
P-:Charge-/discharge-

3s 4s 100A BMS for 14.4V 14.8V Li-ion/Lithium/Li-Polymer 12V 12.8V LiFePO4 Battery Pack with Smbus, I2c, RS232, RS485 and NTC (PCM-L04S100-F49)

Product Description

Related Products