6s-10s 160A High Power PCM BMS for 36V 37V Li-ion/Lithium/ Li-Polymer 30V 32V LiFePO4 Battery Pack with I2c, Smbus and Bluetooth (PCM-L10S160-D61)
Product Description
Product name:Protection Circuit Module
Model No:PCM-L10S160-D61
For 6~10S Lithium-ion/Lithium Polymer/LiFePO4 Battery Packs
Product Feature:
1. Suitable for 6-10 section Lithium-ion/Lithium Polymer/LiFePO4 Battery Packs;
2. Maximum continuous working current 160A, separate charging and discharging interfaces;
3. Overcharge, overdischarge, short circuit, overcurrent, temperature protection, etc.;
4. Temperature switch detects battery temperature and controls discharge MOSFE;
5. Bluetooth function, mobile phone APP connection;
6. The metering IC adopts BQ78350, which can read the parameters such as voltage, capacity, current, temperature and cycle number;
7. The required information can be read through the display screen of model PCM-LCD001-415;
8. Transmit data through RS232 or RS485 interface and write protocol according to customer requirements;
Protection Circuit Module Specifications For 32V LiFePO4 Battery Packs | |||
No | Test item (Test at normal temperature 25±2ºC and relative humidity≤90%) | Criterio | |
1 | Communication Interface | SMBus/RS485/Bluetooth/I2C | |
2 | Capacity | Designing battery capacity(PCM) | 150Ah |
Max capacity(Battery pack) | 320Ah | ||
Min capacity(Battery pack) | 100mAh | ||
External capacity Indication | LCD,LED,SOC | ||
Gas gauge algorithm | CEDV | ||
3 | Voltage | Charging voltage | DC: 36V CC/CV(3.6V/1cell) |
Cell-balance detection voltage (Charge balance) | 3.6V±0.03V | ||
Cell-balance release voltage | 3.5V±0.025V | ||
Cell-balance detection delay time | 0.96~1.4s | ||
4 | Current | Balance current for single cell | 84±5mA |
Current consumption for single cell | ≤20μA | ||
Normal operating-mode current (Gas Gauge IC) | 650 uA | ||
SLEEP operating-mode current (Gas Gauge IC) | 300 uA | ||
FULL SLEEP operating-mode current (Gas Gauge IC) | 0.1 uA | ||
Maximal continuous charging current | 160A | ||
Maximal continuous discharging current | 160A | ||
5 | Over charge Protection | Over charge detection voltage | 3.900 ± 0.025 V |
Over charge detection delay time | 0.5S~1.5S | ||
Over charge release voltage | 3.600 ± 0.050 V | ||
6 | Over discharge protection | Over discharge detection voltage | 2.00 ± 0.080 V |
Over discharge detection delay time | 50~150ms | ||
Over discharge release voltage | 2.70 ± 0.100 V | ||
7 | Over current protectio | Over current detection voltage | 0.2±0.015V |
Over current detection current | 400±80A(can adjust) | ||
Detection delay time | 5~20ms | ||
Release condition | Cut load | ||
8 | Short protectio | Detection condition | Exterior short circuit |
Detection delay time | 200-800us | ||
Release condition | Cut load | ||
9 | Resistance | Protection circuitry (MOSFET) | ≤40mΩ |
10 | Temperatur | Operating Temperature Range | -40~+85ºC |
Storage Temperature Range | -40~+125ºC | ||
Dimension | L208*W150*T35mm | ||
B+:Battery+ | |||
B-:Battery- | |||
SMBD:SMBus data line | |||
SMBC:SMBus clock line | |||
P+:discharge+ | |||
P-:discharge- | |||
CH+:Charge+ | |||
CH-:Charge- | |||
Communication mode: | |||
1. RS232,RS485 Conversion board: | |||
2. LCD (PCM-LCD001-415) |